Adapter til tændingsstyret strøm til udvalgte BMW-motorcykler '00-'26
DENALI's adapter til tændingsstyret strøm tilsluttes din BMW's GPS-strømstik (på motorcykler med Nav-forberedelse) for at levere en CANbus-sikker, tændingsstyret 12 V-strømkilde til aktivering af et relæ, der kan forsyne DENALI-lygter, PowerHubs eller andet elektronisk tilbehør. Det forudinstallerede Posi-lock-stik betyder, at du ikke behøver at lave afgreninger, gennembore, skære eller lodde originale ledninger. BMW's GPS-strømkilde aktiveres sammen med tændingen, så den leverer strøm, når tændingen slås til, og slukker, når tændingen slås fra. Bemærk, at dette tilbehørskredsløb på de fleste BMW'er er konstrueret med en forsinket slukning, så dit ekstra tilbehør følger den samme fabriksindstilling.
Bemærkning om installation: DENALI's adapter til tændingsstyret strøm er beregnet til at aktivere et relæ (sælges separat) og er ikke beregnet til direkte strømforsyning af elektrisk tilbehør. Hvis tilbehør får strøm direkte fra denne adapter, kan kredsløbet blive overbelastet, så CANbus-systemet afbryder strømmen til kredsløbet, indtil overbelastningen er fjernet.
Overall rating: 4.8 / 5 from 13 reviews.
This adapter worked perfectly allowing me to easily connect auxiliary lights to the factory GPS power connector on my 2022 R1250 GSA. I connected the switched wire on my auxiliary lights wiring harness to the posi-tap connector in the Denali adapter (the main power leads from lights went directly to the battery). I contacted support for clarification before I placed the order and got a prompt and very helpful response.
Easy plug and play solution. No instructions came with device and I didn't know where to find the matching connector, but a msg to Denali was answered within 24 hours and they supplied a photo and suggestion on where to look. Done!
This little adapting harness works perfectly. Nice Work fellas!
Fully Expected A plus
Totally simplified the connection to the bike. Excellent.
Put a radar detector on my bike and needed a switched power supply Used the Denali switched power break out adapter ran the wire to a mini relay to give the detector a switched power from the battery so its still operating from the can bus
Good
Worked perfect! Didn’t have to cut any wires and even got an assist with the install location from your team.
The fit is perfect : the hard part is wiggling the bmw gps connector to loosen the connection in order to plug in the Denali plug
good so far
Plug and play - worked brilliantly as an ignition trigger for a PDM.
Does what it is supposed to do and easy to install.
It worked as it should.
