CANsmartâ˘-controller til BMW R1300GS, R1300GS Adventure '24-'26 og R12 G/S '26+
Udnyt fleksibiliteten og intelligensen i din BMW-motorcykels elektriske CAN-bussystem, og gør installationen af tilbehør markant nemmere med den nye og forbedrede DENALI CANsmart⢠Controller GEN II.
DENALI CANsmart⢠Controller giver plug-and-play-installation og integreret styring af op til fire tilbehørsenheder, sü du für adgang til dusinvis af indstillinger, der kan tilpasses og styres direkte fra BMW's "WonderWheel" eller softwaren CANsmart⢠Accessory Manager.
CANsmart-enhedens fire kredsløb er forprogrammeret til at tilslutte og styre to sÌt DENALI 2.0-lygter, et SoundBomb-horn og vores ekstra B6-bremselygte uafhÌngigt af hinanden.
Gen II â Flere funktioner, mere effekt, større alsidighed
I modsÌtning til Gen I CANsmart kan alle fire kredsløb i Gen II levere fulde 10 ampere kontinuerlig effekt, og hvert kredsløb kan konfigureres til at styre enhver type tilbehør. Det maksimale strømforbrug for hele enheden er fortsat 30 ampere kontinuerligt. Gen II har ogsü to nye indstillinger til ekstra lygter. Du kan nu modulere dine ekstra lygter for at øge synligheden og indstille venstre og højre sideblink til at slukke uafhÌngigt, nür du aktiverer det tilsvarende blinklys.
Funktioner
Synkronisering af nĂŚrlys/fjernlys â Indstil de ekstra lygter til at skifte mellem en programmerbar nĂŚrlys-/fjernlysindstilling med køretøjets originale fjernlyskontakt.
TĂND/SLUK og dĂŚmpning â Styr uafhĂŚngigt to sĂŚt lygter TĂND/SLUK, og skift lysstyrkeniveau (bĂĽde dag og nat) direkte fra køretøjets originale kontakter.
Modulering af lygter â Indstil de ekstra lygter til at modulere for at øge din synlighed over for andre trafikanter.
Flash to Pass â Har du brug for at fange nogens opmĂŚrksomhed? AktivĂŠr fjernlyskontakten tre gange, sĂĽ blinker de ekstra lygter hurtigt tre gange.
Slukning med blinklys â Denne funktion slukker den tilsvarende ekstra lygte, nĂĽr du aktiverer blinklyset, sĂĽ kraftige ekstra lygter ikke overdøver dit blinklys.
Omvendt blink med havariblink â Denne funktion fĂĽr de ekstra lygter til at blinke omvendt af havariblinket, hvilket øger synligheden ved nødsituationer i vejkanten.
Plug-and-play-installation af horn â Tilslut hurtigt og nemt kraftige eftermarkedshorn som vores SoundBomb⢠uden at skulle tilføje et ekstra ledningsnet eller relĂŚ.
Blink med horn â NĂĽr denne funktion er valgt, fĂĽr CANsmartâ˘-softwaren automatisk de ekstra lygter til at blinke, nĂĽr du aktiverer hornet. Funktionen virker, uanset om du har det originale horn eller et SoundBombâ˘-horn installeret.
Decelerationsaktiveret "Smart Brake"-teknologi â CANsmart⢠aflĂŚser køretøjets hastighed i realtid og aktiverer den ekstra bremselygte under deceleration, før du overhovedet rører bremsen. Du kan justere følsomheden og den minimumshastighed, hvor Smart Brake-funktionen aktiveres.
Blinkmønster ved bremsning â CANsmart⢠tilbyder fire forskellige blinkmønstre, som gør vores ekstra, meget kraftige bremselygter endnu mere synlige for trafikanter bag dig. Du kan indstille de ekstra bremselygter til kun at blinke ved hĂĽrd opbremsning, blinke konstant, mens bremsen er aktiveret, eller blinke hurtigt fire gange og derefter lyse konstant (blinkefrekvens, der er lovlig i Californien).
Valg af kredsløbsfunktion â Valget af kredsløbsfunktion i CANsmart-softwaren giver dig mulighed for at bruge det tilbehør, du ønsker, pĂĽ et hvilket som helst af de fire kredsløb. Klik pĂĽ et kredsløbsikon for at ĂĽbne rullemenuen, og vĂŚlg blandt de tilgĂŚngelige kredsløbsfunktioner.
TĂŚndingsstyret strømkilde â CANsmart⢠tilbyder en universel "tilbehør"-indstilling, som ganske enkelt giver dig ren, tĂŚndingsstyret 12 V-strøm. Det betyder, at alt tilbehør, du tilslutter dette kredsløb, tĂŚndes og slukkes sammen med tĂŚndingen.
Forsinket slukning â Du kan ogsĂĽ indstille tilbehøret pĂĽ dette kredsløb til at slukke med en tidsforsinkelse. Det holder strømmen til dem i op til 30 sekunder, efter at du har slukket motorcyklen.
Indbygget strømforsyning â Indstillingen "tilbehør" er ideel til strømforsyning af din GPS, telefon, opvarmede beklĂŚdningsgenstande eller enhver anden elektronisk enhed.
Hvad er inkluderet?
CANsmart⢠Controller
(x2) 1,68 m forlĂŚngersplittere
1,52 m forlĂŚngerkabel til SoundBomb-horn
Ledningsadapter til B6-bremselygte
Kabelbindere
SelvklĂŚbende burrebĂĽnd
Micro-USB-programmeringskabel
Software
Klik HERfor at downloade CANsmart Accessory Manager-softwaren til Windows eller Mac
Køretøjskompatibilitet
BMW R1300GS Trophy (2024-2026)
BMW R1300GS Triple Black (2024-2026)
BMW R1300GS Option 719 Tramuntana (2024-2025)
BMW R1300GS Option 719 Biscaya (2026)
BMW R1300GS Adventure Trophy (2025-2026)
BMW R1300GS Adventure Triple Black (2025-2026)
BMW R1300GS Adventure Option 719 Karakorum(2025-2026)
Clearly Denali is cutting corners and sacrificing quality now.
The harness terminals now come without the shrinkwrap that was installed in previous products, even the B6 adapter that comes with the CanSmart bundle comes without the shrinkwrap. I bought a spare B6 adapter and funny enough, that one DOES have shrinkwrap on it. Its quite a shame that Denali is now reducing costs and quality and increasing prices of their products.
I attached a photo of an older harness from another CanSmart I bought a year ago.
Store owner replied:
Thanks for taking the time to write this review. We are aware of this issue; we had a batch of these B6 adapters that were shipped from the factory without the heatshrink. The missing heatshrink will not affect the waterproofing of the connector. It's just a cosmetic issue.
Only difficult part was finding the DWA plug on the R1300 GS Adventure. Once found the can buss fit into the bikes cavity under the passenger seat. The B6 light was used on the yellow circuit and the programming was easy.
I had the previous one on my BMW R1250GS >> this new one for the R1300 GS seems so good quality as the previous one and allows to manage the horn at the same time which is a good point (as we avoid a relay).
Not install yet as until yesterday I was waiting for the cash bar to install the D4
This thing runs everything without slicing a single wire on my bike! Even the accessory channel has two Switched hot leads to trigger accessories. I'm also running some Clearwater lights, a Denali sound bomb, and a Clearwater Billy brake light. All working flawlessly. Thank you Denali!
Note that this CANsmart controller also works for the 2026 R1300RT. I am a little surprised that Denali has not updated their list of vehicles that are supported by this controller to include the 2026 R1300RT.
A. With the pigtails it is too cumbersome to put underneath the gs1300 seat. It would be nice if the pigtails were plug into the unit instead of hardwired to reduce space.
B. The pigtails are dedicated for denali or similar products. If you need just an expansion to a generic item only one adapter is provided, and the connection type is irregular.
C. There is no app for android or apple, which means you have to drag out your laptop to make any changes.
I returned it and am still awaiting credit.
Store owner replied:
Sorry to hear you didn't like the CANsmart. There is limited space on the R1300GS but the CANsmart does fit with all the necessary cables. We have two CANsmarts installed on our R1300GS. We have pigtail adapters sold separately for anyone who needs to build adapters for products with different style connectors. Your refund will be processed once we've received the return, and we'll email you once it's been processed. I'm sorry the product wasn't right for you!
-Alex with Denali
Very easy to install and set up and the tech support has been fantastic.
Love the Denali products. Fully equipped my 2025 BMW R1300 GS Adventure with the full range including D7 Pros, D2 ambers, 2 Denali Smart Cans, Soundbomb, T3âs and a B6. Couldnât be happier and the support from the Denali team was phenomenal. The team (Carsen) was responsive and provided excellent instruction.
Directions for installation could definitely be better. Denali says 30 minute install om my 2025 1300GSA but you really need to pull the tank for a proper install, which required removing 22 pieces if the bike and more bolts then i could count.
The T3âs connected to this Cansmart as directed (had same setup on M1000XR and worked fine. The turn does not come on on teo of them and also have an odd led flutter.
Going to try and return all of this as hard to get live person to troubleshoot, though pretty straight forward how to connect.
This is my second one. I sent you an email about the fact that the yellow (brake) circuit is not working. I confirmed it using the diagnostic tool on the app. Fantastic.
I pulled the harnesses through but need a new cansmart
Store owner replied:
Sorry for the trouble Bradley. I see we've created a Return Authorization for you so that this CANsmart will be exchanged once we receive your return. Let us know if you need any help installing or programming the replacement unit. -Alex with Denali
It's a great item, but I think it would be better if the included cable could be separated into a y splitter cable and a straight cable.
Had the full D7 Pro package installed on new 1300GS, everything I expected after years of satisfaction on my old 1200GS CanBus package.
My only complaint is this is 2024 and the CanBus still requires a USB-Micro cable. Trying to connect any modern laptop with USB-C ports only required a cable I did not own and will likely never use for any other situation.
Also be nice if there was an iPad app, another good reason to switch to USB-C.
Installed both the CANSMART and the brake light on my 24 R13OO GS. Super high quality components, installation was straightforward and instructions were very good. I just added some note on the attached photos I sent in to help clarify where to interrupt the factor wires to insert the CANSMART wires. Best part is the fact that this brake light is beyond bright and attention getting!! I feel much better having this on the back as BMW did away with the stand alone brake light and opted for the turn signal / brake combo. 5 Stars on these products!! Highly recommend them.