BWI FAMILY OF BRANDS ▼
  Brown & Watson Brown & Watson
  Brown & Watson Power Management Brown & Watson
  Brown & Watson Automotive Accessories Brown & Watson
  Brown & Watson Automotive Offroad Lighting Brown & Watson
  Brown & Watson Motorcycle Electronics Brown & Watson
  Brown & Watson Motorcycle Accessories Brown & Watson
  Brown & Watson Outback Offroad Lighting Brown & Watson
  •  
    EUR | da
  •  
    EUR | da
Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort
Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort
Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort
Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort
Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort
Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort

Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort

SKU: LAH.00.10500.B UPC: 810005870627

€141,74 EUR
€141,74 EUR
€141,74 EUR
incl VAT

Your Selections:

Beslag til kørelys – drejeligt stangklemmebeslag 50 mm-60 mm, sort

Ikke på lager, men flere er på vej – bestil nu for at reservere din i dag!

Dette DENALI-beslagssæt til stangmontering af lygter gør det muligt at montere alle DENALI LED-lygter på motorcyklers yderste gaffelrør eller på ethvert rør med en diameter på 50-60 mm (2"-2,375"). Disse lygtebeslag har en unik ottekantet indvendig profil, som gør det muligt for klemmerne at gribe sikkert om rør med mange forskellige diametre. Sættet omfatter også en valgfri, fuldt drejelig monteringshylde, der skaber en yderst alsidig og robust løsning til lygtemontering.

Disse klemmer er beregnet til motorcykler med synlige omvendte forgafler, såsom enduro-, dualsport- og naked-motorcykler. Klemmerne gør det muligt at montere lygter foran eller på hver side af gaffelrørene, så der sikres fri plads til kåber og andet tilbehør. Klemmerne har også den perfekte størrelse til montering på underbenene på konventionelle forgafler, som typisk findes på mange cruiser- og standardmotorcykler.

Funktioner

  • Justerbart grebsområde (50-60 mm)
  • Monteringshyldens længde: 60 mm
  • Drejelig monteringshylde giver en fjerde justeringsakse
  • Lygter kan monteres på hylden eller direkte på klemmen
  • Passer til M8-bolt fra lygteenheden
  • Fræset aluminium med sort anodiseret overflade

Hvad er der i æsken?

  • (x2) Monteringsklemmer
  • (x2) Drejelige monteringshylder
  • (x1) Hardwarekit

Brugsanvisning

  • Variant: Default Title
  • SKU: LAH.00.10500.B
  • UPC : 810005870627
  • Vægt: 0.55 lb
  • Produkttype: Universalbeslag til lys

Questions & Answers

>

Customer Reviews

Customer Reviews

Overall rating: 4.1 / 5 from 18 reviews.

Produit de bonne qualité, solide et fait parfaitement le travail. Petit bémol : j’aurais apprécié une fine protection en caoutchouc au niveau du serrage afin de mieux protéger la fourche. Le prix reste également assez élevé pour ce type de pièce. Malgré cela, rien à signaler à l’utilisation, le produit remplit parfaitement sa fonction.

Maxime T. 4/5 Verified

Driving Light Mount - Articulating Bar Clamp 50mm-60mm, Black

Measure 50mm on my bike bar but wont fit, has to add some foam to tight good, the arm bolt got loose on a few minutes riding easy on off road, I did use locktite but wasnt enough, has to super tight to keep it in place, let see if it work better now

Michael M. 3/5 Verified

Driving Light Mount - Articulating Bar Clamp 50mm-60mm, Black

I just purchased a year old used motorcycle with 800 miles on it with these fork clamps installed on the bike. When I went to take the clamps off, I noticed that the clamps had marred up the outer fork tubes as there is no rubber/silicone between the tube and the clamp like other brands have engineer their clamps to have� it looks horrible so I looked up the price of replacement outer fork tubes and they are 629.03 � a piece. That translates to $1404.72� I would just like to thank this company for making such a wonderful product�

Gabriel C. 1/5

Driving Light Mount - Articulating Bar Clamp 50mm-60mm, Black

Quality is top notch. Great fit and finish on the mounts as excepted. These are not cheap pot metal units and you get what you pay for. I am using them with D4 lights mounted to the 2 inch roll cage on a Honda Talon. Rated them as 4 stars as it would be nice if they came with some sort of gasket or pad on the back side as the finish is very smooth and combined with my painted roll cage there is some slip between the mount and cage.

Clark L. 4/5 Verified

Driving Light Mount - Articulating Bar Clamp 50mm-60mm, Black

Product seemed high quality, nice finish. Put them on with no issues. Ran them for about 2 weeks and one of the mounts for the light had snapped at the base. Unfortunately when I have called, the phone continues to ring.

David H. 3/5

Driving Light Mount - Articulating Bar Clamp 50mm-60mm, Black

I have not used these yet, probably in the next week. But super happy to use these up top of my forks w/ new S4 pod lights. I wasn't sure of the clamp fit, but ran out to the bike and they were super. For the Aprilia Tuareg 660, and I believe that w/ their very narrow profile and set up right to the bottom triple clamp, they will be clear, just, of the 9 �" travel of the suspension. And they will be well inside of the body from crash damage. I'm also interested to see the turning shift of lighting from their position on the forks.

Richard J. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 50mm-60mm, Black

Did a search for "GSXS1000GT+", this came up as an "exact fit" mount, however IT DOES NOT WORK OUT ON THE GT MODEL. There is not enough room for these mounts to not impinge on the fenders during travel nor does it clear the fairings. This product will most definitely work on the GSXS 1000 naked, but NOT ON THE GT. Returned as there is no way these will work. Shame as it is a quality product and was really looking forward to using them.

Mark C. 3/5

Driving Light Mount - Articulating Bar Clamp 50mm-60mm, Black