BWI FAMILY OF BRANDS ▼
  Brown & Watson Brown & Watson
  Brown & Watson Power Management Brown & Watson
  Brown & Watson Automotive Accessories Brown & Watson
  Brown & Watson Automotive Offroad Lighting Brown & Watson
  Brown & Watson Motorcycle Electronics Brown & Watson
  Brown & Watson Motorcycle Accessories Brown & Watson
  Brown & Watson Outback Offroad Lighting Brown & Watson
  •  
    EUR | it
  •  
    EUR | it
Supporto per luce di marcia - morsetto articolato per barra da 21 mm a 29 mm, nero
Supporto per luce di marcia - morsetto articolato per barra da 21 mm a 29 mm, nero
Supporto per luce di marcia - morsetto articolato per barra da 21 mm a 29 mm, nero
Supporto per luce di marcia - morsetto articolato per barra da 21 mm a 29 mm, nero
Supporto per luce di marcia - morsetto articolato per barra da 21 mm a 29 mm, nero

Supporto per luce di marcia - morsetto articolato per barra da 21 mm a 29 mm, nero

SKU: LAH.00.10300.B UPC: 810005871341

€107,17 EUR
€107,17 EUR
€107,17 EUR
incl VAT

Your Selections:

Supporto per luce di marcia - morsetto articolato per barra da 21 mm a 29 mm, nero

Esaurito, ma ne arriveranno altri: ordina ora per prenotare il tuo!

Questo kit di supporti per luci da barra DENALI consente di montare qualsiasi luce LED DENALI su paramotore, barre antiurto o qualsiasi tubo con diametro compreso tra 21 mm e 29 mm (0,826-1,125 pollici). Questi supporti per luci presentano un esclusivo profilo interno ottagonale che consente ai morsetti di afferrare saldamente tubi di diversi diametri e includono una mensola di montaggio opzionale, completamente ruotabile, per creare una soluzione di montaggio delle luci estremamente versatile e robusta.

Questi morsetti sono progettati per montare le luci su barre antiurto originali o aftermarket, manubri e tubi del telaio comunemente presenti su moto adventure, dual sport, quad e motoslitte. I morsetti consentono di posizionare le luci all'interno delle barre, assicurando che siano protette in caso di caduta da fermo.

Caratteristiche

  • Intervallo di serraggio regolabile (21-29 mm) (0,826-1,125 pollici)
  • Lunghezza della mensola per la luce: 60 mm
  • La mensola di montaggio ruotabile consente un quarto asse di regolazione
  • Le luci possono essere montate sulla mensola o direttamente sul morsetto
  • Compatibile con bulloni M8 del corpo luce
  • Alluminio ricavato dal pieno con finitura anodizzata nera
  • Compatibile con tutte le barre antiurto originali standard SW-MOTECH, R&G, Givi, Kappa, Hepco-Becker, Krauser, Touratech e BMW


Cosa contiene la confezione?

  • (x2) Morsetti di montaggio
  • (x2) Mensole di montaggio ruotabili
  • (x1) Kit di minuteria


Manuale di istruzioni

Questions & Answers

>

Customer Reviews

Customer Reviews

Overall rating: 4.8 / 5 from 91 reviews.

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Hello, very high quality goods. Easy to install. It's just a pity that these brackets had to be ordered a second time, because they were not included in the first shipment for 1600€. And even the seller does not respond to emails.

Kestutis L. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

My experience with Denali products has been fabulous. I bought new lights, mounting brackets, high /low switch and wiring harness. I also purchased the Denali Sound Bomb plug& play horn for my new Aprilia Tuareg 660. All the products are superb quality, fit well, and function as advertised.

Zach 5/5

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Quite simply a bad design resulting in a marginal product. Having a single mounting screw in the dead center of the mounting shelf makes it nearly impossible to tighten properly while keeping it square. This design also means the slightest bump or nudge will cause the shelf to twist out of alignment. I have not found anything better yet, but that does not make this a great product, just the best of bad options

Kenneth C. 1/5

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

These mounts are great! This was the longest part of the installation on the Pan America because these mounts are so universal and allow infinite adjustment and placement. This Pan America sees pavement, gravel, and dirt roads in the Black Hills and Badlands of South Dakota. Blue locktite was used during installation and I have yet to readjust after 200 miles of washboard roads, gravel, and good/bad pavement.

Michael G. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

I had to go with this mounting option as the upper tank bars I have are not supposed to work with the bike specific mount which I liked for the set up. I was very happy with set up, only recommendation I would make is a non-marring contact where the mount contacts the bars, which I remedied with a trick I saw someone use on YouTube which was door edge protector by 3M.

Dr. E. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

High quality fit and finish and a stable platform for the investment you made into your Denali Electronic lights. These are the perfect complement to your lights as they match the quality and robust overall appearance of Denali Lights. The hardware that comes with the brackets are excellent and are very sturdy. If you are looking for that professional clean factory looks this is the best way to go. The investment you're making with your lights I would recommend you secure them with brackets made for them. Highly recommend..

Gustavo J. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Bra finish, men en M6 skrue i selve klemmen er for lite. D4 lykt festet direkte i klemmen uten armen er en dårlig løsning, men eneste som passet fint på BMW R1250GS OEM crash bars. D4 har en M8 skrue, så M6 blir underdimensjonert og passer dårlig i braketten på lykten.

Roger F. 2/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black