وحدة تحكم CANsmart™ لسلسلة BMW R1200LC وR1250 '13-'24

SKU: DNL.WHS.11602 UPC: 810005872300

السعر العادي
€363,01 EUR
سعر التخفيض
€363,01 EUR
السعر العادي
€363,01 EUR
incl VAT
سعر الوحدة
لكل 

لم يتبقَّ سوى -22!

Your Selections:

وحدة تحكم CANsmart™ لسلسلة BMW R1200LC وR1250 '13-'24

نفد المخزون، لكن المزيد في الطريق - اطلب الآن لتحجز نسختك اليوم!

استفد من مرونة وذكاء نظام الحافلة الكهربائية CAN في دراجتك النارية BMW لتسهيل تركيب الملحقات بشكل كبير مع وحدة التحكم الجديدة والمحسّنة DENALI CANsmart™ Controller GEN II.

توفر وحدة التحكم DENALI CANsmart™ تركيبًا بالتوصيل والتشغيل وتحكمًا مدمجًا بما يصل إلى أربعة ملحقات، لتمكين عشرات الإعدادات القابلة للتخصيص التي يمكن التحكم بها مباشرةً من عجلة BMW الدوارة "WonderWheel" أو برنامج CANsmart™ Accessory Manager.

تتم برمجة دوائر CANsmart الأربع مسبقًا لتوصيل مجموعتين من مصابيح DENALI 2.0 وبوق SoundBomb ومصباح الفرامل الإضافي B6 والتحكم بها بشكل مستقل.


الجيل الثاني - مزايا أكثر، قدرة أكبر، وتعدد استخدامات أعلى

على عكس CANsmart من الجيل الأول، يمكن لكل دوائر الجيل الثاني الأربع توفير قدرة مستمرة كاملة تبلغ 10 أمبير، كما يمكن تهيئة كل دائرة لتشغيل أي نوع من الملحقات. ويظل الحد الأقصى لاستهلاك القدرة للوحدة بأكملها 30 أمبير بشكل مستمر. كما يتميز الجيل الثاني بإعدادين جديدين للمصابيح الإضافية. يمكنك الآن تعديل شدة وميض مصابيحك الإضافية لتعزيز وضوحها، وضبط مصابيح الجانب الأيسر والأيمن على الإلغاء بشكل مستقل عند تفعيل إشارة الانعطاف المقابلة.

المزايا

  • المزامنة بين الضوء العالي والمنخفض - اضبط المصابيح الإضافية للتبديل بين إعدادين قابلين للبرمجة للضوء العالي والمنخفض باستخدام مفتاح الضوء العالي الأصلي.
  • التشغيل/الإيقاف والتعتيم - تحكم بشكل مستقل في مجموعتين من المصابيح بالتشغيل/الإيقاف وغيّر مستوى شدة الإضاءة (للنهار والليل) مباشرةً من مفاتيح مركبتك الأصلية.
  • تعديل وميض المصابيح - اضبط المصابيح الإضافية على الوميض لزيادة وضوحك أمام سائقي المركبات الآخرين.
  • الوميض للتنبيه - هل تحتاج إلى لفت انتباه أحد؟ اضغط على مفتاح الضوء العالي ثلاث مرات، وستومض مصابيحك الإضافية ثلاث ومضات سريعة.
  • الإلغاء مع إشارة الانعطاف - تلغي هذه الميزة تشغيل المصباح الإضافي المقابل عند تفعيل إشارة الانعطاف، مما يمنع المصابيح الإضافية القوية من حجب إشارة الانعطاف.
  • الوميض العكسي مع أضواء التحذير - تومض هذه الميزة مصابيحك الإضافية بشكل عكسي مع أضواء التحذير، مما يزيد وضوحك أثناء حالات الطوارئ على جانب الطريق.
  • تركيب البوق بالتوصيل والتشغيل - صِل بسرعة وسهولة أبواق ما بعد البيع عالية القدرة، مثل SoundBomb™، من دون الحاجة إلى إضافة ضفيرة أو مرحّل إضافي.
  • الوميض مع البوق - عند تحديد هذه الميزة، سيقوم برنامج CANsmart™ تلقائيًا بتشغيل وميض مصابيحك الإضافية عند إطلاق البوق. تعمل هذه الميزة سواء كنت تستخدم البوق الأصلي أو بوق SoundBomb™.
  • تقنية "Smart Brake" المفعّلة بالتباطؤ - يقرأ CANsmart™ سرعة المركبة في الوقت الفعلي لتفعيل مصباح الفرامل الإضافي أثناء التباطؤ حتى قبل لمس الفرامل. يمكنك ضبط الحساسية والسرعة الدنيا التي تتفعّل عندها ميزة Smart Brake.
  • أنماط وميض الفرملة - يوفر CANsmart™ أربعة أنماط وميض مختلفة تجعل مصابيح الفرامل الإضافية فائقة السطوع أكثر وضوحًا لسائقي المركبات خلفك. يمكنك ضبط مصابيح الفرامل الإضافية بحيث تومض فقط عند الفرملة الشديدة، أو تومض باستمرار أثناء الضغط على الفرامل، أو تومض أربع مرات بسرعة ثم تظل مضاءة (معدل وميض قانوني في كاليفورنيا).
  • محدد وظائف الدوائر - يتيح لك محدد وظائف الدوائر في برنامج CANsmart تشغيل أي ملحق تختاره على أي دائرة من الدوائر الأربع. انقر على أيقونة دائرة لفتح القائمة المنسدلة واختيارك من قائمة وظائف الدوائر المتاحة.
  • مصدر طاقة switched - يوفر CANsmart™ خيار "ملحق" عامًا يمنحك ببساطة طاقة 12 فولت نظيفة يتم التحكم بها عبر مفتاح الإشعال. وهذا يعني أن أي ملحق توصله بهذه الدائرة سيعمل ويتوقف مع تشغيل وإيقاف الإشعال.
  • مهلة إيقاف التشغيل - يمكنك أيضًا ضبط الملحقات المتصلة بهذه الدائرة على إيقاف التشغيل بعد مهلة زمنية. وسيبقي ذلك الملحقات مزودة بالطاقة لمدة تصل إلى 30 ثانية بعد إيقاف تشغيل دراجتك.
  • طاقة مدمجة - يُعد خيار دائرة "الملحق" مثاليًا لتزويد نظام GPS أو الهاتف أو الملابس المدفأة أو أي جهاز إلكتروني آخر بالطاقة.

ماذا يوجد في الصندوق؟

  • وحدة تحكم CANsmart™
  • (x2) موزعات تمديد بطول 5.5 قدم
  • كابل تمديد لبوق SoundBomb بطول 5 أقدام
  • محوّل أسلاك مصباح الفرامل B6
  • أربطة كابلات
  • مثبّت لاصق بخطاف وحلقة
  • كابل برمجة Micro USB

البرنامج

انقر هنا لتنزيل برنامج CANsmart Accessory Manager لنظامي Windows أو Mac

    ملاءمة المركبات

    BMW
    R 1200 GS LC — 2013, 2014, 2015, 2016, 2017, 2018 R 1200 GS LC Adventure — 2014, 2015, 2016, 2017, 2018, 2019
    R 1200 GS Rallye — 2017 R 1200 R — 2015, 2016, 2017, 2018, 2019
    R 1200 RS — 2015, 2016, 2017, 2018, 2019 R 1250 GS — 2019, 2020, 2021, 2022, 2023, 2024
    R 1250 GS Adventure — 2019, 2020, 2021, 2022, 2023, 2024 R 1250 R — 2020, 2021, 2022, 2023, 2024
    R 1250 RS — 2020, 2021, 2022, 2023, 2024 R 1250 RT — 2019, 2020, 2021, 2022, 2023, 2024

     

    لعرض وحدات تحكم CANsmart™ للمركبات من العلامات والطرازات الأخرى، انقر هنا


    تنزيل دليل التعليمات

      • البديل: Default Title
      • رمز المنتج: DNL.WHS.11602
      • UPC : 810005872300
      • وزن: 1.27 lb
      • نوع المنتج: إدارة الملحقات

      Questions & Answers

      >

      Customer Reviews

      Customer Reviews

      Overall rating: 4.8 / 5 from 81 reviews.

      Customer video review of CANsmart™ Controller for BMW R1200LC & R1250 Series

      Love the products! Confidence is at a different level when riding at night, and in the city, you want to be seen, the lights do the job! I give them an A+ Costumer service is excellent Thank You!!

      CANsmart™ Controller for BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      fantastic product, my R1200GS 2013, feels like a different bike at night. people don't believe that it is 13 years old and even less now. I repeat a fantastic product. I recon you call Denali customer service direct and don't buy in stores, as I was recommended the wrong bus and had to buy again. The sales rep which advised me on the web chat did an excellent job.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Store owner replied: Thank you very much for the review! We're glad to help you bring your bike into this decade, in terms of lighting and conspicuity! -Alex with Denali

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      CANsmart is a true Plug&Play device, downloaded the software & was able to configure all my devices, wiring was easy & plenty of space to store the device underneath the seat, used foam to suppress possible vibrations & 3M tape for the USB port - just in case

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      East install instructions need to be more specific. Plugs should be lettered or numbered for specific no mistake installation. Lots of comments on lights from other riders this past weekend ride Will be showing them off at Bikeweek this weekend in Daytona Beach. Rock solid mounting brackets add confidence to the look and steadfast zeroing of the hot spot beams on the road ahead with my super bright hi beams too. Outstanding product.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Purchased CANsmart with D4 and B6 lights. Everything packaged well and arrived in good condition. Installation and setup was very easy with various options for operation. Very well please with light output and Denali products.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Installation is straight forward. Wires are too long for the application and should be cut to length for each application. Works as advertised. Caps for the lead ends that are not used are not provided. Did not see an option to purchase caps either maybe I missed it on the website.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer video review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      I enjoy the Denali setup! I also enjoy the functionality of these lights. I have since (this video) added the T3s to the front and rear. The difference in riding at night is astounding! And the rear flashing brake lights get drivers attention as soon as they start flashing!! I get a LOT more space when I brake now! And the D7s are dipped toward the ground at 10% to not blind oncoming traffic. But at 100% (even angled down) they provide so much light that it’s like riding during the day.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Not only that the install is simple and quick, the customer service is First Class! I want to make sure that my lights configurations set in a particular way. The two representatives that I’ve talked to were very knowledgeable and patient to assist! Made the whole experience AMAZING!

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Store owner replied: Thanks for such a glowing review! I will pass on your kind words to our CS staff!

      Customer video review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      I love the CanSMART controller. I have used one now both my F850GSA and now a new R1250GSA (photo and video attached). The installation is straightforward, easy to read and understand directions along with Denali/TT support staff; I’ve used both. I used the CanSMART to power B6 tail lights shown, but also D4 Aux lights and DRL’s as well. Lastly, you can find lots of YouTube videos of installations and all kinds of adventure bikes. I’ve used the software as well, but have always gone back to the default settings. Maybe the Sound Bomb is next….

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Customer photo review of CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Love the Denali Cansmart, the B6 Brake light and the Soundbomb! I've also connected my Weiser Technic Turn Indicators Front and Rear to the CanSmart. To be able to plug in my computer and control all these elements is amazing. Also makes addition of components so easy and adds less fused connections to my already crowded battery compartment. Plus the support received from Jesse and the customer support team is unparalleled! You can really tell that they ride bikes and really care about the product and supporting customers. Thanks, Denali!

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      The product is good but the customer service of Nick and Alex is absolutely amazing! They helped and supported me through all the process and I couldn’t be more grateful to them. Thank you

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Very straight forward on installation, and easy to setup. Also your tech team staff are so helpful. Thanks again for your product and support, my lights work great, and have so many functions with the can smart.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Replaced my Gen I controller from 7 years ago on my 2018 BMW R1200RS… The Gen II is a little larger in length but everything else is the same. Easy installation and plug and play, as advertised. I use mine to control my D2 light pods and B6 brake light for visibility. A rider friend refers to my light pods as “landing lights”. I have no complaints with my Denali system and feel I have a lot more visibility than without. Would I recommend it, yes. Is it a bit pricey, yes. Does it make you more visible and illuminate more in front of you, absolutely!

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      The introduction of the EZ-CAN to my BMW r1250R has raised an issue. With only an accessory attached to the EZ-CAN, the BMW reports that the license plate light is not working. I moved to a different circuit and the error cleared, is now a sometimes error. I'm hoping that the error goes away, or becomes constant so it is easier to track down.

      CANsmart™ Controller GEN II - BMW R1200LC & R1250 Series

      Store owner replied: Hey Steven, that's an odd issue! Please give us a call at +1 401-360-2550 so we can begin to troubleshoot this with you. Have you confirmed that the code disappears just by simply disconnecting the CANsmart? -Alex