BWI FAMILY OF BRANDS ▼
  Brown & Watson Brown & Watson
  Brown & Watson Power Management Brown & Watson
  Brown & Watson Automotive Accessories Brown & Watson
  Brown & Watson Automotive Offroad Lighting Brown & Watson
  Brown & Watson Motorcycle Electronics Brown & Watson
  Brown & Watson Motorcycle Accessories Brown & Watson
  Brown & Watson Outback Offroad Lighting Brown & Watson
  •  
    EUR | fr
  •  
    EUR | fr
Support de feu de route - collier articulé pour barre de 21 mm à 29 mm, noir
Support de feu de route - collier articulé pour barre de 21 mm à 29 mm, noir
Support de feu de route - collier articulé pour barre de 21 mm à 29 mm, noir
Support de feu de route - collier articulé pour barre de 21 mm à 29 mm, noir
Support de feu de route - collier articulé pour barre de 21 mm à 29 mm, noir

Support de feu de route - collier articulé pour barre de 21 mm à 29 mm, noir

SKU: LAH.00.10300.B UPC: 810005871341

€107,17 EUR
€107,17 EUR
€107,17 EUR
incl VAT

Your Selections:

Support de feu de route - collier articulé pour barre de 21 mm à 29 mm, noir

Rupture de stock, mais d’autres exemplaires sont en route : commandez maintenant pour réserver le vôtre dès aujourd’hui !

Ce kit de fixation pour feu de protection DENALI permet d’installer n’importe quel feu LED DENALI sur des protections moteur, des barres anti-chute ou tout tube de 21 mm à 29 mm (0,826 à 1,125 po) de diamètre. Ces fixations pour feux présentent un profil intérieur octogonal unique qui permet aux colliers d’agripper fermement une large gamme de diamètres de tubes. Elles comprennent également une plateforme de fixation amovible et entièrement rotative, pour créer une solution de montage de feux extrêmement polyvalente et robuste.

Ces colliers sont conçus pour fixer des feux sur des barres anti-chute d’origine ou adaptables, des guidons et des tubes de cadre couramment présents sur les motos d’aventure, les motos dual-sport, les quads et les motoneiges. Ils permettent de positionner les feux à l’intérieur des barres, afin de les protéger en cas de chute à l’arrêt.

Caractéristiques

  • Plage de serrage réglable (21 à 29 mm) (0,826 à 1,125 po)
  • Longueur de la plateforme pour feu : 60 mm
  • La plateforme de fixation rotative offre un quatrième axe de réglage
  • Les feux peuvent être fixés sur la plateforme ou directement sur le collier
  • Compatible avec les boulons M8 des modules de feux
  • Aluminium usiné dans la masse avec finition anodisée noire
  • Compatible avec toutes les barres anti-chute standard SW-MOTECH, R&G, Givi, Kappa, Hepco-Becker, Krauser, Touratech et BMW d’origine


Contenu de la boîte

  • (x2) Colliers de fixation
  • (x2) Plateformes de fixation rotatives
  • (x1) Kit de visserie


Manuel d’instructions

Questions & Answers

>

Customer Reviews

Customer Reviews

Overall rating: 4.8 / 5 from 91 reviews.

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Hello, very high quality goods. Easy to install. It's just a pity that these brackets had to be ordered a second time, because they were not included in the first shipment for 1600€. And even the seller does not respond to emails.

Kestutis L. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

My experience with Denali products has been fabulous. I bought new lights, mounting brackets, high /low switch and wiring harness. I also purchased the Denali Sound Bomb plug& play horn for my new Aprilia Tuareg 660. All the products are superb quality, fit well, and function as advertised.

Zach 5/5

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Quite simply a bad design resulting in a marginal product. Having a single mounting screw in the dead center of the mounting shelf makes it nearly impossible to tighten properly while keeping it square. This design also means the slightest bump or nudge will cause the shelf to twist out of alignment. I have not found anything better yet, but that does not make this a great product, just the best of bad options

Kenneth C. 1/5

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

These mounts are great! This was the longest part of the installation on the Pan America because these mounts are so universal and allow infinite adjustment and placement. This Pan America sees pavement, gravel, and dirt roads in the Black Hills and Badlands of South Dakota. Blue locktite was used during installation and I have yet to readjust after 200 miles of washboard roads, gravel, and good/bad pavement.

Michael G. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

I had to go with this mounting option as the upper tank bars I have are not supposed to work with the bike specific mount which I liked for the set up. I was very happy with set up, only recommendation I would make is a non-marring contact where the mount contacts the bars, which I remedied with a trick I saw someone use on YouTube which was door edge protector by 3M.

Dr. E. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Customer photo review of Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

High quality fit and finish and a stable platform for the investment you made into your Denali Electronic lights. These are the perfect complement to your lights as they match the quality and robust overall appearance of Denali Lights. The hardware that comes with the brackets are excellent and are very sturdy. If you are looking for that professional clean factory looks this is the best way to go. The investment you're making with your lights I would recommend you secure them with brackets made for them. Highly recommend..

Gustavo J. 5/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black

Bra finish, men en M6 skrue i selve klemmen er for lite. D4 lykt festet direkte i klemmen uten armen er en dårlig løsning, men eneste som passet fint på BMW R1250GS OEM crash bars. D4 har en M8 skrue, så M6 blir underdimensjonert og passer dårlig i braketten på lykten.

Roger F. 2/5 Verified

Driving Light Mount - Articulating Bar Clamp 21mm-29mm, Black